|

|
SaberTM Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
AMSOIL SaberTM Professional (ATP) is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle motors, SaberTM 2-Cycle Oil has excellent lubricity and cleanliness properties, controlling friction and preventing wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oils have been protecting and providing improved performance in two-cycle motors since 1973.
ISO-L-EGD, JASO FC, API TC
Buy Now
Available Packages:
1.5 oz 'pillow packs' (48 per case) (mixes 1 gallon of gas)
8-oz bottles (12 per case)
Quarts (12 per case)
30 Gallon Drum
55 Gallon Drum
|
Be Sure To Check Out AMSOIL's Full Line Of 2-Cycle Products:
SaberTM Professional is available in several package sizes, to suit your mixing needs:
- 1 Gallon Mix Pillow Packs (1.5 oz of oil) ATP-PK each; ATP-48 case of 48 pillows
- 2 to 2 1/2 Gallon Mix Bottle (3.5 oz of oil) ATP-BA each; ATP-35 case of 12 bottles
- 5 to 6 Gallon Mix Bottle (8 oz of oil) ATP-BC each; ATP-08 case of 12 bottles
- Quarts - ATP-QT each; ATP-01 case of 12 quarts
- 30 and 55 Gallon Drums
SaberTM Professional (ATP) is specifically designed for small engines including, but not limited to, chain saws, lawn equipment, blowers, chop saws, pumps, scooters and go-carts. It is available in a 3.5-oz. bilingual (English/Spanish) container which is ideal for treating the 2 2.5-gallon cans of gas commonly used for storing mixed gas on the job. Saber Professiona is also very good for use in motorcycles, snowmobiles, ATVs, jet boats and personal watercraft. Saber Professional is formulated with high temperature detergent additives that prevent hard carbon deposits from forming in these hot operating motors. Saber Professional is "smokeless" and delivers fewer emissions at 100:1 mix ratios than oils mixed at 50:1. Equipment operators subjected to smoke and fumes will benefit from these low emission properties. Because one mix ratio satisfies multiple pieces of equipment, SaberTM Professional eliminates mix ratio confusion. SaberTM Professional is recommended for pre-mix where ISO-L-EGD, JASO FC or API TC is specified.
Applications
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.
| 2.6 oz. |
per 1 U.S. gallon |
50:1 |
| 8 oz. |
per 5 U.S. gallons |
80:1 |
| 8 oz. |
per 6 U.S. gallons |
100:1 |
|
TYPICAL TECHNICAL PROPERTIES
SaberTM Professional Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATP)
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)
|
13.5 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)
|
99 |
| Viscosity Index (ASTM D-2270) |
136 |
|
Pour Point °C (°F) (ASTM D 97)
|
-36 (-33) |
|
Flash Point °C (°F) (ASTM D 92)
|
114 (237) |
| Fire Point °C (°F) (ASTM D 92) |
114 (237) |
| DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN. |
|